How to Clean a Dirt Bike Helmet to Avoid Early Deterioration?

After a strenuous day of motocross, cleaning your helmet is a simple and effective task that can be easily overlooked by many riders. As a result, helmets in gear bags are often left poorly maintained or motorcycle helmet cleaning is completely neglected.

Anyone who enjoys riding dirt bikes is aware of the value of keeping their helmets clean. In addition to improving your appearance, it helps preserve your helmet in good shape so that it can shield your head in the case of an accident.

A dirt bike helmet may accumulate mud, dust, and other debris after frequent use. Cleaning the helmet on a regular basis is crucial to keeping it in good shape. The following article will illustrate some easy-to-use and quick techniques that will help you in cleaning your dirt bike helmet. 

Things You Need for Cleaning the Dirt Bike Helmet

It’s recommended to wash your helmet liner after each ride. The helmet’s liner will be sweaty even if it hasn’t been a particularly muddy day and the helmet is still clean. Fabric and foam are naturally vulnerable to sweat. It will eventually deteriorate if not washed. 

Similar is the case with the foam on your goggles. Nowadays, the majority of helmets contain a washable lining and cheek padding. Thus, it’s crucial to clean the helmet with the right products and supplies. Before cleaning, ensure you have all the products mentioned below. 

Microfiber Fabric or Towel

Microfiber materials are specifically designed to make sure gentle cleaning; thus, you need to have a towel with microfibers. This fabric is ideal for washing as well as drying the face shield and the overall helmet.

Soft Toothbrush

This is particularly helpful for getting into narrow spaces that the Microfiber cloth can’t reach, such as the area behind vent covers, visors, and face shield gaskets. Also helpful are cotton swabs.

Baby shampoo

It is the most delicate cleaning product that isn’t based on petroleum and is inexpensive.

Steps to Follow While Cleaning the Dirt Bike Helmet

These are some of the essential yet easy steps to follow when you plan to clean your dirt helmet. 

Remove The Liner

Most updated helmets come with detachable liners, but you must be careful when removing the liner from your helmet. Removing the press studs and detaching them from the EPS liner’s borders is relatively sensitive and prone to tearing. Don’t use too much force; it’s there for your comfort and protection.

Cleaning the Lining

The cheek pads and liner should only be hand-washed with lukewarm, soapy water. A mild cleanser, such as baby shampoo, doesn’t include harsh chemicals that could damage the foam or irritate you the next time you wear it.

Though I personally believe it is too harsh, some individuals throw the liner and cheek pads into the washing machine. If you must machine wash them, make sure to put them in a separate bag and use a light soap and the gentle cycle.

Let the helmet air dry after using a clean towel to pat it dry. It is recommended to avoid using a dryer to dry it out because it will distort the interior foam. Before reassembling, simply leave the helmet somewhere well-ventilated for at least one night.

Cleansing the Shell’s Exterior

To avoid damaging the paint finish when washing the helmet’s shell, be careful not to damage it. Use some running water to remove the majority of the dried mud if it has been a very muddy day and the helmet has a lot of it on it. To remove the remaining filth, use a soft, non-abrasive cloth and some warm, soapy water.

Some dried-on dirt and dead insects can be removed from the helmet by placing a warm, moist towel over it for a short period of time. Make sure to avoid using any type of ammonia-based window cleaner or cleaners that include solvents or acids while cleaning the plastic components of your helmet, such as the vent covers, chin vent, visor, and face shield.

These have the potential to damage the plastic and eliminate any anti-fog coating on the face shield’s interior. With extreme caution to avoid scratching it, gently clean the face shield using a microfiber cloth or microfiber towel. Sun visors inside vehicles should rarely become dirty. All that is required is a light wipe-down with a Microfiber towel.

Put The Helmet Back Together

Start by putting the cheek pads and liner back into your helmet when they have completely dried off. After cleaning your helmet, replace helmet visor, face shield, Bluetooth device, helmet camera, and any other items you removed. And store it in a dried place till your next ride; avoid keeping it in damp places. 


Helmets for dirt bikes are tough to clean. The best part is that you may restore your helmet to its original condition with a bit of work. The most effective method of cleaning your dirt bike helmet using fewer cheap products is described in this article. We appreciate you taking the time to read our bike helmet cleaning guide. Your helmet will soon be in like-new condition if you follow these instructions. 

Joost Smith

A Perpetual motorcycle rider with the sound experience & knowledge to analyze and write about motorcycle helmets. You would get to read the most practical reviews, honest opinions, and best possible recommendations through my review articles.